| P
r o d u c t s |
|
| Temperature
Controlled Solder Bath
"Dry
Solder Joint" is the greatest headache for an Electronic and Electrical
equipment manufacturers. Even with the best quality solder it is
difficult to avoid dry joints, if the leads or end of the bus bar
are not properly tinned. The problems of dry joints are likely to
crop up even after several checks on the equipments. To avoid this
possibility we can offer a gadget viz. Temperature Controlled Solder
Bath : Model TCSB II
Model TCSB - II
|
Model
: TCSB - II
|
This
model enables a Quality Control Engineer to check the Solderability
of components at the inspection stage as per ISI 589. Model TCSB -
II is also extensively used in Electronic and Electrical Industries
for tinning the bus bar ends or the components leads to ensure better
joints. This gadget can also be used for tinning of wafers in semiconductor
devices manufacturing companies.
Model
: TCSB - II consists of
(a) Solid State
Electronic Temperature Controlling Unit,
(b) Solder Melting Pot mounted on SS Platforms on sturdy MS Angle
frame at a comfortable height for the operator.
Temperature Controller is Thermocouple sensing type having setting
and indicating range from 0 to 400° with an accuracy  1°
C. The Temperature Controller Unit is available with Digital Indicating
Controller. Solder Melting Pot Consists of specially designed four
heaters mounted around stainless steel container which is resistant
to solder.
All the safety factors are taken into consideration to make the device
easy to operate and fail safe. |
| 1. |
Solid
state with latest IC Technology. |
| 2. |
Auto
Room Temperature compensation. |
| 3. |
Thermocouple
break protection. |
| 4. |
Easy
maintenance & replacement. |
| 5. |
Sturdy
design of solder melting pot having SS Container fixed
on MS Frame. |
| 6. |
Easy
to operate & Fail Safe. |
|
|
| 1. |
Temperature
Controller & Indicator Input:
Thermocouple. |
| 2. |
Solder
Melting Pot : |
|
a)
Internal Dimension : |
|
L
= 15 cm, W = 10 cm, H = 15 cm |
|
b)
Material Melting Pot : |
|
Stainless
Steel |
| 3. |
Heater
Wattage / Voltage : |
|
400
Watts / 250 V (4 Nos.) |
|
Model
TCSB - I
This
model enables a Quality Control Engineer to check the Solderability
of components at the inspection stage as per ISI 589. Model
TCSB - I is also extensively used in Electronic and Electrical
Industries for tinning the wire ends or the components leads
to ensure better joints. |
Model
: TCSB - I |
|
Model
: TCSB - I consists of
(a) Solid
State Electronic Temperature Controlling Unit,
(b) Solder Melting
Pot mounted on SS Platforms on sturdy MS Angle frame with SS Platform.
Temperature Controller
is Thermocouple sensing type having setting and indicating range from
0 to 400° with an accuracy 1°
C. The Temperature Controller Unit is available with either Blind
Controller or Digital Indicating Controller. Solder Melting Pot Consists
of specially designed heating bath with stainless steel container
which is resistant to solder. |
| 1. |
Solid
state with latest IC Technology. |
| 2. |
Auto
Room Temperature compensation. |
| 3. |
Thermocouple
break protection. |
| 4. |
Easy
maintenance & replacement. |
| 5. |
Sturdy
design of solder melting pot having SS Container fixed
on MS Frame. |
| 6. |
Easy
to operate & Fail Safe. |
|
|
| 1. |
Temperature
Controller & Indicator Input:
Thermocouple. |
| |
Accuracy
: 1
% of F.S.D. Controlling |
| |
Controlling
& indicating Range : 0 to 400° C. |
| |
Supply
Voltage : 230 V. AC. 50 c/s. |
| 2. |
Solder
Melting Pot : |
| |
a)
Internal Dimension : |
| |
6
cm. Height, 5 cm. diameter, |
| |
(Volume
- 20 cm3 ) |
| |
b)
Material : Melting Pot : |
| |
Stainless
Steel |
| 3. |
Heater
Wattage / Voltage : |
| |
400
Watts / 250 V. |
|
|
| (
Bath of Other Dimensions offered ) |
 |
